Basic Info.
Working Style
Rotary Type
Air Wrench Type
Impact wrench
Pneumatic Drill Range
Mining
Degree of Automation
Semi-automatic
Screwdriver Startup Mode
Under pressure
Customized
Non-Customized
Working Pressure
0.35-0.63MPa
Cyilinder Dia. X Stroke
63X55mm
Rock Drill Hole Dia
34~42 mm
Product Name
Drilling Rigs for Sale
Product Description
Gold mining equipment YO18 hammer drill
High-efficiency hand-holde Y018 Rock Drill Jack Hammer
1.Weight :18kg
2.Application : construction sites, various type of mines, water conservancy construction etc.
3.Driven by air compressor
4.Rock drill
Y018 type rock drill is a high power drilling tool,which is mainly used at various mines,capital construction of farmland ,blasting for construction roads in mountain areas or other projects.YO18 type rock drill have advantages as follows :
1). Save energy and high effciency
2). Strong impact energy
3). Low noise and vibration
4). Easy handling
5). Wet drilling
6). Easy cleaning air /water holes
7). Spare parts easily purchasing
Application of High efficiency Hand-hold YT28 Rock Drill Jack Hammer
1.Application:
The products are mainly used in construction sites, various type of mines, water conservancy construction and national defense construction areas for mining operations.
2.Product Feature:
The product apply in hard rock on the rock operation.It has stong adaptability to the working conditions.The product is energy efficiency , its components has long life and durable.The machine can be generally used with the same type,it can greatly reduce the customer loss for spare part replacement .Dia .of hoe from 32mm-80mm,deep from 0.5-6m.
Operation And Maintenance of Hand-hold YO18 Rock Drill Jack Hammer
1.Operaion of High efficiency Hand-hold YO18 Rock Drill Jack Hammer
a).Antirust has been injected to the machines before them departed from the factory, take down the inner parts of the machine and clean them, then assemble the machine again.
When assembling the machine, the interface of all the parts should be coated with lubricating oil. After finishing the assembling the valve parts (consist of valve box, valve and valve bushing) must work smoothly and the two long screw nut must work well. Insert the end of the drill pole into the rotation chuck and turn the drill pole in one direction manually it must work smoothly, meanwhile, check each operation system whether in its normal state.
Let the machine run without load to check whether it working normally and the time should not exceed 5 minutes.
b) Clean the inner and the connection part before connecting the water hose and the air pipe in case of the machine damaged by some dirt.
c) Before running, make sure there is enough lubricating oil in the oil injector so that the machine can work smoothly.
After the work finished, close the water hose first let the machine run for a while to get rid of the water remain in the machine.
2.Maintenance of High efficiency Hand-hold Y018 Rock Drill Jack Hammer
Symptom | Reason | Remedies |
The drilling speed slowing down | Low working pressure | 1.Reduce the working drillers |
| | 2. Make sure there is no pressure leakage of the pipe. |
| | 3. Change the unqualified pipes or switches. |
| Lubricating is not good | Oiling according to the instruction and maintain the pipes are free. |
| Water pipe blocked , the head leaking water or water flowing into to cylinder | 1. Change the breaking water needle in time. |
| | 2.The rod blocked or the size need to change |
| | 3. The hydraulic pressure is higher than air pressure leading to water flowing into the machine; reduce the hydraulic pressure in this situation. |
| Vibrating | 1. The abrasion of the shank end sleeve is serious use the straight rod. |
| | 2. The rod is bend use straight one |
Technical Details of Hand-hold YO18 Rock Drill Jack Hammer
Hand Hold Rock Drill(YO18) |
Total Length(mm) | 550 |
Weight(Kg) | 18 |
Cylinder Diameter(mm) | 58 |
Piston Stroke(mm) | 45 |
Air Pipe Inner Diameter(mm) | 19 |
Working Pressure(Mpa) | 0.35-0.63 |
Impact Energy (J) | ≥22 |
Impact Frequency(Hz) | ≥32 |
Air Consumption(L/s) | ≤20 |
Water Pipe Inner Diameter(mm) | 8 |
Rock Drill Hole Dia(mm) | 34~42 |
Rock Drill Hole Depth(m) | 5 |
Shank dimensions | 22×108mm |
Water pressure | 3.9-5.9×105Pa |
Average speed (at 3.9×105Pa ) | 80mm |
Torque(at4.9×105Pa ) | 7.85N / m |
Average speed(at4.9×105Pa ) | 120mm |
Address:
No. 545, Century Avenue, Quzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001
Company Introduction:
Kaishan Group is an enterprise group developed from Zhejiang Kaishan Co., Ltd, which attains a good reputation in the province. It is honored as the company of good faith and is among the key companies specially fostered by Zhejiang Provincial People′s Government. The group is the largest manufacturer of Pneumatic Tools in the same trade in terms of production scale. Our company is franchisee of Kaishan group. Therefore, compare to other small trading companies who fake themselves as factories but buy from the distributor, we definitely can offer you the most competitive price especially for big order.
If you want more information, please feel free to contact with us or visit our website.
Quzhou Kaipu Mechinery Equipment Co., Ltd.
Add.: No. 551, Century Avenue, Quzhou, Zhejiang, China (Mainland)